Design & Layout
Bath or Walk-In Shower? What Brisbane Homeowners Should Weigh Up
Bathroom Renovation Brisbane·Updated November 2026·6 min read
Swapping a shower-over-bath for a walk-in shower is one of the most common bathroom changes in Brisbane, because it makes a small room feel bigger and is easier to use. But if it's the only bath in the house and you have young kids, or you plan to sell to families, keeping a bath can matter. The change itself usually means new waterproofing and tiling across the whole wet area.

Why do so many people remove the bath?
A shower over a bath has a high step, a curtain or a bulky screen, and a cramped standing area. Replacing it with a walk-in shower and a frameless screen opens up the room, is safer to step into, and is easier to clean. In small bathrooms and ensuites, it's often the single change that makes the room work.
When is it worth keeping a bath?
If it's the only bathroom and you have young children, a bath is hard to live without. Many buyers with families also look for at least one bath in the house. If you have two bathrooms, a common approach is a walk-in shower in the ensuite and a bath, or a bath plus separate shower, in the main bathroom.
What does the change involve?
Removing a bath isn't just swapping one fixture for another. The tiles and old waterproofing around the bath and shower usually come out, the floor is screeded to fall towards the new drain, the whole shower area is waterproofed to AS 3740, and the room is re-tiled. The drain may need to move, which is simple on a timber floor with access underneath and harder on a slab.
A linear floor drain along one wall lets you use large tiles and a level or near-level entry.
What does it cost in Brisbane?
It depends on how much of the room is redone. Published Brisbane figures put waterproofing at $700 to $3,500, tiling at $2,800 to $7,500, demolition at $1,000 to $3,000 and a frameless shower screen at $800 to $2,500, plus plumbing. If you're redoing the whole room, it's effectively a full renovation: $20,000 to $35,000 for mid-range.
Bath and shower together?
If the room is big enough, a freestanding bath beside a separate walk-in shower gives you both. Published Brisbane figures put a freestanding bath at $1,500 to $5,000 installed. Check the floor can take the weight of a full bath, especially on timber.
What you get for the price
The standard we ask of every renovator we refer you to
The renovator does the work, not us. Ask for each of these in your written quote and contract.
- A renovator with a current QBCC licence for the work, and public liability insurance (certificate on request)
- Waterproofing to AS 3740 by a licensed waterproofer, with a certificate you keep
- Plumbing by a licensed plumber and electrical work by a licensed electrician
- A written, itemised quote: demolition, waterproofing, tiling, fixtures and labour listed
- A written contract for any job over $3,300, with no more than the legal maximum deposit (10% up to $19,999, 5% from $20,000)
- Queensland Home Warranty Scheme cover arranged by the renovator on jobs over $3,300
- Photos of the waterproofing before it is tiled over, and a walk-through at handover
Photos of the waterproofing, and a written scope
Waterproofing is hidden under the tiles once the job is done. You get photos of the membrane before tiling and the waterproofing certificate, plus a written scope before anything starts.
Licensed, insured renovator, public liability certificate on request
Questions people ask
Related services
Published 17 November 2026.